Installing basket strainers can be frustrating!
An extra pair of hands to hold from the top is often required. The thin nuts used to secure them are hard to grip with large jaw pliers. Make that final turn and you more often than not spin the whole basket strainer body. This could make the basket strainer un-centered. Worse, by weakening the putty seal you risk a leak and call back.
The EZ On Basket Strainer solves all of these problems! Easy, one-handed installation. The unique locking mechanism utilizes three notches and tabs to secure the basket strainer. Three hex screws tighten it up to the sink. Use a phillips or flat head screwdriver. Use a 5/16" nutdriver or hex head nut setter in your cordless drill.
The EZ On stays centered and sealed. Can be installed in less than thirty seconds!
- 304 stainless steel body
- Polished drain flange
- Stainless steel basket
- Fits sink openings of 3-1/2" to 4"